Home › Bait Boards
Bait Boards for New Zealand Boats — Fibreglass Range
The full SeaKing range of fibreglass bait boards for New Zealand boats — from compact boards for alloy dinghies to full-size boards for offshore trailer boats. Every board carries a composite fibreglass shell, an integrated sink with drain and 316 marine-grade stainless hardware, and every NZD price includes free delivery across New Zealand.
SeaKing bait board range
SeaKing Bait Board B01 (650mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board B02 (650mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board B03 (830mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board B04 (830mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board H10 (830mm x 400mm)
SeaKing Bait Board H10B (830mm x 400mm)
SeaKing Bait Board HH-14 (625mm x 390mm)
SeaKing Bait Board HJ-15 (700mm x 415mm)
SeaKing Bait Board JJ-12 (600mm X 350mm)
SeaKing Bait Board SK-E09 (820mm x 460mm)
SeaKing Bait Board SK-E09 - Black (820mm x 460mm)
SeaKing Bait Board SK-J07 (700mm x 420mm)
SeaKing Bait Board SK-K08 - BLK (700mm x 420mm)
SeaKing Bait Board SKL-L06 (900mm x 500mm)
SeaKing Bait Board SKL-S05 (720mm x 500mm)
SeaKing Bait Board SQ-13 (700mm x 350mm)
SeaKing Bait Boards Leaning Post Top SKL-11 (700mm x 280mm)
Which bait board suits your NZ boat?
Start with your boat length and where the board will mount, then pick features — rod holders, cup holders, or a leg-mount frame. The guide below matches every SeaKing board to the boats Kiwi anglers typically run.
Dinghies, small alloys and kayaks (3.5–5m)
On a small dinghy, deck space is everything — a compact 600–700mm board gives you a genuine work surface for snapper and kahawai without crowding the boat. The SK-H10 and HH-14 clamp straight onto the transom with no drilling, and the JJ-12 is the smallest board in the range at 600 x 350mm. See the full small-boat bait boards collection.
Trailer boats and runabouts (5–6.5m)
Mid-size trailer boats carry a wider transom shelf, which opens up the mid-range boards: the HJ-15 (700 x 415mm) and the B01 (650 x 430mm) with integrated rod holders. Both bolt through the transom shelf or gunnel rail with the supplied 316 stainless hardware and backing plates. Browse all transom and rail mount bait boards.
Offshore and hard-top boats (6.5m+)
Bigger water and bigger fish call for the large-format boards: the B03 and B04 (830 x 430mm) carry game-rated rod holders through the fibreglass shell, and the leg-mount SKL series — up to the 900 x 500mm SKL-L06 — stands on integrated stainless legs where there is no flat gunnel run. See boards with rod holders and the leg-mount range.
| Mounting style | Best for | Models | Range |
|---|---|---|---|
| Clamp mount | Dinghies and small boats — no drilling | SK-H10, HH-14 | Small boats |
| Transom / rail bolt-through | Most trailer boats and runabouts | B01–B04, HJ-15, SQ-13, SK-E09, SK-J07 | Transom mount |
| Leg mount | Offshore boats, launches, leaning posts | SKL-S05, SKL-L06, SKL-11 | Leg mount |
| With rod holders | Game fishing — holders rated for marlin and tuna drag loads | B01, B02, B03, B04 | Rod holders |
Cup holders are built into the B02, B04, HH-14, HJ-15, JJ-12 and both SKL leg-mount boards — the full list is on the cup-holder collection page.
Why Kiwi anglers are switching to fibreglass
No spot on a boat cops more punishment than the bait board: it sits in full sun, takes salt spray every trip, and has a stainless knife dragged across it all day. Fibreglass copes with that treatment better than either alternative. Because the gelcoat shell is electrochemically inert, it never forms the galvanic cell that gradually corrodes an aluminium board around its stainless fittings — a real problem on boats that live on salt water year-round. Gelcoat also stays rigid under a filleting knife where moulded plastic flexes, and shallow knife scars polish back out instead of staying for the life of the board.
The honest trade-off is weight — fibreglass carries more of it than aluminium — but bolted to a transom that extra mass reads as stability, not burden. For the complete weight, durability, hardware and 10-year cost of ownership comparison, read our aluminium vs fibreglass bait boards guide.
Built for New Zealand fishing
New Zealand fishing is hard on gear. Boats get trailered long distances, pound home across harbour bars, and sit in salt-laden wind between trips — conditions that find every weak fastener and every cheap surface. A fibreglass board with 316 stainless hardware shrugs off what the Hauraki Gulf, the Bay of Islands, or a Canterbury surf ramp can throw at it, and the gelcoat surface cleans up with a bucket of seawater after a morning on the snapper.
The compact boards suit the alloy dinghies and pontoon-style hulls that do most of New Zealand's inshore work, while the B-series and leg-mount boards fit the bigger trailer boats and launches that chase kingfish and tuna wide. Every board is priced in New Zealand dollars with delivery included — freighted from our Melbourne workshop across the Tasman, allow 2–3 weeks for metro centres and 3–4 weeks for regional addresses.
Bait Boards for Every Boat — Dinghy to Offshore Hard-Top
What makes a SeaKing bait board
- Composite fibreglass shell — marine-grade gelcoat, UV-stable, electrochemically inert.
- 316 marine stainless hardware — bolts, rod-holder bases, drain fittings; no galvanic failure mode.
- Integrated sink + drain — moulded into the shell during manufacture, not bolted on.
- Australian-made — handcrafted in Melbourne by a working fibreglass boat builder.
- 1-year warranty + free NZ-wide delivery — every board, every order.
A bait board is a mounted work surface fitted to the rear of a fishing boat — used for cutting bait, rigging traces, and filleting catch at the transom. This page covers the full SeaKing fibreglass range for New Zealand anglers, from compact boards for 4m dinghies to full-size boards for 9m+ offshore boats. Every board is made in Melbourne, carries a 1-year warranty, and is priced in NZD with delivery to New Zealand included.
Whether you fish the harbour from a small alloy or run wide for kingfish, the SeaKing range covers every New Zealand rig. Every board is built from full composite fibreglass — the same material used in marine hull construction — with 316 marine-grade stainless steel hardware throughout. For smaller vessels, see our bait boards for small boats collection.
Weighing up fibreglass against an aluminium board? Read our detailed aluminium vs fibreglass bait boards comparison covering weight, durability, hardware, and total cost over a 10-year ownership window. For boards that come with rod holders included, the B-series rod-holder range is purpose-built — game-rated 316 stainless holders, integrated through the fibreglass shell to transfer marlin/tuna drag load through the board structure.
From Northland to Southland, every SeaKing board sold in New Zealand is handcrafted at our Melbourne workshop and delivered to your door with freight included in the NZD price. For a complete boat fishing setup, pair any board with our fillet tables.
- ✓ Bait boards for boats from 4m dinghies to 7m+ offshore vessels
- ✓ Composite fibreglass shell — handles saltwater UV without degrading
- ✓ Integrated sink + drain fitting on every board (no retrofit needed)
- ✓ 316 marine-grade stainless hardware throughout
- ✓ Game-rated rod holders included on the B-series; standalone holders available for other models
- ✓ Free New Zealand-wide delivery, 30-day returns, 1-year warranty
Boat-builder made, shipped to New Zealand
Every SeaKing board is the work of Harry, a fibreglass boat builder with more than 20 years in marine composite construction, who designs and handcrafts the range at his Melbourne workshop using the same lamination and gelcoat finishing techniques that go into building boat hulls. You can see the boat-builder thinking in the details: the sink is moulded into the shell during layup instead of being bolted on later, the B-series rod-holder bases pass through the fibreglass so a screaming drag transfers its load into the board structure, and there is not a single fitting on the board that is not 316 marine-grade stainless.
Because the boards are made and dispatched from our own Melbourne workshop, there is no importer or dealer margin in the price — and every New Zealand order includes Tasman freight in the NZD price, with a 30-day return window and a 1-year warranty.
Frequently Asked Questions
- What is a bait board?
- A bait board is a mounted work surface fitted to the rear of a fishing boat — used for cutting bait, rigging traces, and filleting catch at the transom. A good board keeps mess off the deck, gives you a stable cutting surface underway or on the drift, and drains blood and offal overboard through an integrated sink rather than into the bilge. On New Zealand boats they are usually bolted to the transom shelf or gunnel rail of an alloy dinghy, trailer boat, or launch.
- What size bait board do I need for my boat?
- Size depends on your transom width and fishing style. Compact models (SK-H10, HH-14, JJ-12) suit dinghies and small runabouts from 3.5–5m. Mid-range boards (HJ-15, B01) fit 5–7m trailer boats. Larger B-series boards (B03, B04) and the leg-mount SKL series suit 7m+ offshore vessels. Measure your transom rail width as a starting point — most SeaKing boards mount via clamps or bolt-through fittings with no hull drilling required.
- How do bait boards mount to a boat?
- Most SeaKing boards are flat-mount: they bolt through the transom shelf or gunnel rail with 316 stainless bolts and supplied backing plates, sealed with marine polyurethane. The SK-H10 and HH-14 clamp straight onto a dinghy transom with no drilling. For boats with no flat gunnel run — a launch or centre console with a leaning post, for example — the leg-mount SKL series stands on integrated stainless legs instead. Installation takes around 20–30 minutes with basic tools, and a guide is included with every board.
- What is the difference between fibreglass, aluminium and plastic bait boards?
- A fibreglass board is finished in marine-grade gelcoat, which is UV-stable, electrochemically inert, and pairs with 316 stainless hardware without setting up galvanic corrosion. An aluminium board weighs less, but in saltwater it slowly reacts with its own stainless bolts and fittings until the metal pits and the hardware works loose. Moulded plastic is the budget option — it flexes under load, scars fast under a filleting knife, and chalks in the sun. Around New Zealand salt water, fibreglass outlasts both. Read the full aluminium vs fibreglass comparison.
- Do your bait boards come with rod holders?
- Only the B-series boards (B01, B02, B03, B04) ship with rod holders built in — game-rated 316 marine stainless holders that will take the drag load of a tuna or marlin. The rest of the range (SK-H series, JJ-12, HH-14, HJ-15) comes without holders, though all are compatible with aftermarket units. If rod holders matter to your fishing, start with the B-series.
- Are SeaKing bait boards made in Australia?
- Yes. Every SeaKing bait board is handcrafted at our Melbourne workshop by a working fibreglass boat builder — composite lamination, gelcoat finishing, and 316 stainless hardware fit-out are all done in-house — then freighted across the Tasman to New Zealand customers. Nothing in the range is imported or rebadged, and every board carries a 1-year warranty.
- How much does a bait board cost in NZ, and is delivery included?
- SeaKing bait boards start from $508 NZD, with pricing based on board size, model, and included features. Every NZD price includes free delivery anywhere in New Zealand — no minimum spend. Boards are freighted from our Melbourne workshop across the Tasman, so allow 2–3 weeks for metro centres and 3–4 weeks for regional addresses.
- Will a bait board fit my alloy dinghy or trailer boat?
- Almost certainly. SeaKing boards use a universal bolt-through mounting pattern that suits the transom shelves and gunnel rails on the alloy dinghies, pontoon-style hulls, and fibreglass trailer boats common on New Zealand ramps — and the clamp-mount SK-H10 and HH-14 need no drilling at all. Check the board dimensions listed on each product page against your transom rail width before ordering, and use the supplied backing plates when bolting through thin alloy.