Home › Bait Boards
Bait Boards for Boats — Premium Fibreglass Range
The complete range of fibreglass bait boards for boats — built tough for offshore, inshore, and estuary fishing on Australian vessels. Every boat bait board in the SeaKing range carries a composite fibreglass shell, integrated sink with drain, and 316 marine-grade stainless steel hardware.
SeaKing bait board range
SeaKing Bait Board B01 (650mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board B02 (650mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board B03 (830mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board B04 (830mm x 430mm) & 2 Game Rated Rod Holders
SeaKing Bait Board H10 (830mm x 400mm)
SeaKing Bait Board H10B (830mm x 400mm)
SeaKing Bait Board HH-14 (625mm x 390mm)
SeaKing Bait Board HJ-15 (700mm x 415mm)
SeaKing Bait Board JJ-12 (600mm X 350mm)
SeaKing Bait Board SK-E09 (820mm x 460mm)
SeaKing Bait Board SK-E09 - Black (820mm x 460mm)
SeaKing Bait Board SK-J07 (700mm x 420mm)
SeaKing Bait Board SK-K08 - BLK (700mm x 420mm)
SeaKing Bait Board SKL-L06 (900mm x 500mm)
SeaKing Bait Board SKL-S05 (720mm x 500mm)
SeaKing Bait Board SQ-13 (700mm x 350mm)
SeaKing Bait Boards Leaning Post Top SKL-11 (700mm x 280mm)
Which bait board suits your boat?
Start with your boat length and where the board will mount, then pick features — rod holders, cup holders, or a leg-mount frame. The guide below matches every SeaKing board to the boats it was designed for.
Small tinnies, dinghies and kayaks (3.5–5m)
On a small tinnie, deck space is everything — a compact 600–700mm board gives you a genuine work surface without crowding the boat. The SK-H10 and HH-14 clamp straight onto the transom with no drilling, and the JJ-12 is the smallest board in the range at 600 x 350mm. See the full bait boards for tinnies collection.
Runabouts and cuddy cabins (5–6.5m)
Mid-size boats carry a wider transom shelf, which opens up the mid-range boards: the HJ-15 (700 x 415mm) and the B01 (650 x 430mm) with integrated rod holders. Both bolt through the transom shelf or gunnel rail with the supplied 316 stainless hardware and backing plates. Browse all transom and rail mount bait boards.
Offshore boats and centre consoles (6.5m+)
Bigger water and bigger fish call for the large-format boards: the B03 and B04 (830 x 430mm) carry game-rated rod holders through the fibreglass shell, and the leg-mount SKL series — up to the 900 x 500mm SKL-L06 — stands on integrated stainless legs where there is no flat gunnel run. See boards with rod holders and the leg-mount range.
| Mounting style | Best for | Models | Range |
|---|---|---|---|
| Clamp mount | Tinnies and small boats — no drilling | SK-H10, HH-14 | For tinnies |
| Transom / rail bolt-through | Most runabouts and cuddy cabins | B01–B04, HJ-15, SQ-13, SK-E09, SK-J07 | Transom mount |
| Leg mount | Offshore boats, centre consoles, leaning posts | SKL-S05, SKL-L06, SKL-11 | Leg mount |
| With rod holders | Game fishing — holders rated for marlin and tuna drag loads | B01, B02, B03, B04 | Rod holders |
Cup holders are built into the B02, B04, HH-14, HJ-15, JJ-12 and both SKL leg-mount boards — the full list is on the cup-holder collection page.
Why fibreglass beats aluminium and plastic
A bait board lives in the harshest spot on the boat: full sun, constant salt spray, and a stainless knife working across it every trip. Fibreglass handles all three better than the alternatives. The marine-grade gelcoat shell is UV-stable and electrochemically inert, so it never sets up the galvanic cell that slowly eats an aluminium board around its stainless fittings. It does not flex under a filleting knife the way moulded plastic does, and surface scratches polish out of gelcoat rather than staying for life.
The trade-off is weight — fibreglass is heavier than aluminium — but on a transom-mounted work surface that weight is stability, not burden. For the full weight, durability, hardware and 10-year cost comparison, read our aluminium vs fibreglass bait boards guide.
Built for Australian conditions
Australian fishing punishes equipment: UV that chalks cheap plastics inside a season, salt that finds every mild-steel fastener, and everything from Port Phillip snapper runs to reef trips out of Cairns. SeaKing boards are built for exactly that — a hand-laminated fibreglass shell finished in marine gelcoat, with every bolt, hinge and drain fitting in 316 marine-grade stainless so there is nothing on the board that rusts.
The range covers the boats Australians actually fish from. Clamp-mount compacts suit the Quintrex and Stacer tinnies on every boat ramp from Geelong to Gladstone; the mid-size and B-series boards fit runabouts and cuddy cabins; and the leg-mount SKL boards suit offshore centre consoles. Every board ships free Australia-wide from our Melbourne workshop, with most orders arriving within 2–5 business days of dispatch.
Bait Boards for Every Boat — Tinnie to Offshore Centre Console
What makes a SeaKing bait board
- Composite fibreglass shell — marine-grade gelcoat, UV-stable, electrochemically inert.
- 316 marine stainless hardware — bolts, rod-holder bases, drain fittings; no galvanic failure mode.
- Integrated sink + drain — moulded into the shell during manufacture, not bolted on.
- Australian-made — handcrafted in Melbourne by a working fibreglass boat builder.
- 1-year warranty + free AU-wide shipping — every board, every order.
A bait board is a mounted work surface fitted to the rear of a fishing boat — used for cutting bait, rigging lures, and filleting catch at the transom. This page covers the full SeaKing fibreglass range, built for Australian salt and freshwater fishing vessels from 4m tinnies to 9m+ offshore centre consoles. Every board is Australian-made, carries a 1-year warranty, and ships free across Australia.
Whether you need a bait board for a boat — from a compact 4m tinnie setup to a custom bait board for a 9m offshore centre console — the SeaKing range covers every Australian fishing rig. Every board is built from full composite fibreglass — the same material used in marine hull construction — with 316 marine-grade stainless steel hardware throughout. For smaller vessels, see our bait boards for tinnies range.
Not sure whether fibreglass or aluminium is right for your boat? Read our detailed aluminium vs fibreglass bait boards comparison covering weight, durability, hardware, and total cost over a 10-year ownership window. For boards that come with rod holders included, the B-series rod-holder range is purpose-built — game-rated 316 stainless holders, integrated through the fibreglass shell to transfer marlin/tuna drag load through the board structure.
Trusted by anglers across Victoria, New South Wales, and Queensland — if you're searching for bait boards for sale in Victoria or anywhere in Australia, every SeaKing board is handcrafted at our Melbourne workshop and ships free Australia-wide, with most orders arriving within 2–5 business days. For a complete boat fishing setup, pair any board with our fillet tables.
- ✓ Bait boards for boats from 4m tinnies to 7m+ offshore vessels
- ✓ Composite fibreglass shell — handles saltwater UV without degrading
- ✓ Integrated sink + drain fitting on every board (no retrofit needed)
- ✓ 316 marine-grade stainless hardware throughout
- ✓ Game-rated rod holders included on the B-series; standalone holders available for other models
- ✓ Free Australia-wide shipping, 30-day returns, 1-year warranty
Made in Melbourne by a fibreglass boat builder
SeaKing bait boards are designed and handcrafted in Melbourne by Harry, a fibreglass boat builder with over 20 years of hands-on experience in marine composite construction — the same lamination, transom installation and gelcoat finishing skills used in boat building go into every board. That background shows in the details: the sink is moulded into the shell during manufacture rather than bolted on afterwards, rod-holder bases on the B-series are integrated through the fibreglass so drag load transfers into the board structure, and every fitting is 316 marine-grade stainless.
Because the boards are made and dispatched from our own Melbourne workshop, there is no importer or dealer margin in the price — and every order ships free Australia-wide with a 30-day return window and a 1-year warranty.
Frequently Asked Questions
- What is a bait board?
- A bait board is a mounted work surface fitted to the rear of a fishing boat — used for cutting bait, rigging lures, and filleting catch at the transom. A good board keeps mess off the deck, gives you a stable cutting surface underway or at anchor, and drains blood and offal overboard through an integrated sink rather than into the bilge. On Australian boats they are usually mounted to the transom rail or gunnel of a tinnie, runabout, or centre console.
- What size bait board do I need for my boat?
- Size depends on your transom width and fishing style. Compact models (SK-H10, HH-14, JJ-12) suit tinnies and runabouts from 3.5–5m. Mid-range boards (HJ-15, B01) fit 5–7m vessels. Larger B-series boards (B03, B04) and the leg-mount SKL series suit 7m+ offshore and centre console rigs. Measure your transom rail width as a starting point — most SeaKing boards mount via clamps or bolt-through fittings with no hull drilling required.
- How do bait boards mount to a boat?
- Most SeaKing boards are flat-mount: they bolt through the transom shelf or gunnel rail with 316 stainless bolts and supplied backing plates, sealed with marine polyurethane. The SK-H10 and HH-14 clamp directly to a tinnie transom with no drilling. For boats with no flat gunnel run — centre consoles with a leaning post, for example — the leg-mount SKL series stands on integrated stainless legs instead. Installation takes around 20–30 minutes with basic tools, and a guide is included with every board.
- What is the difference between fibreglass, aluminium and plastic bait boards?
- Fibreglass uses marine-grade gelcoat — UV-stable, electrochemically inert, and fully compatible with 316 stainless hardware without galvanic corrosion. Aluminium is lighter but reacts with stainless bolts and fittings in saltwater over time, leading to pitting and hardware failure. Moulded plastic boards are the cheapest but flex under load, scar quickly under a filleting knife, and fade in UV. For salt and estuary fishing, fibreglass is the longest-lasting of the three. Read the full aluminium vs fibreglass comparison.
- Do your bait boards come with rod holders?
- The B-series boards (B01, B02, B03, B04) include integrated game-rated 316 marine stainless rod holders as standard — rated for marlin and tuna drag loads. All other SeaKing models (SK-H series, JJ-12, HH-14, HJ-15) are sold without rod holders but are compatible with aftermarket holders. If rod holders are essential, start with the B-series.
- Are SeaKing bait boards made in Australia?
- Yes. Every SeaKing bait board is handcrafted at our Melbourne workshop by a working fibreglass boat builder — composite lamination, gelcoat finishing, and 316 stainless hardware fit-out are all done in-house. Nothing in the range is imported or rebadged, and every board carries a 1-year warranty.
- How much does a bait board cost, and is shipping included?
- SeaKing bait boards start from $408 AUD, with pricing based on board size, model, and included features. Free standard shipping is included on every order — no minimum spend — and most boards arrive within 2–5 business days of dispatch, anywhere in Australia.
- Will a bait board fit my Quintrex or Stacer tinnie?
- Almost certainly. SeaKing boards use a universal bolt-through mounting pattern that suits the transom rails and shelves found on popular Australian tinnies like the Quintrex and Stacer ranges — and the clamp-mount SK-H10 and HH-14 need no drilling at all. Check the board dimensions listed on each product page against your transom rail width before ordering, and use the supplied backing plates when bolting through thin alloy.